Carbon Steel 1018 Stainless Steel 304 ISO2400-1972E, BS2704 DIN 54120 Ultrasonic Calibration Blocks IIW V-2

IIW 2 test block

Standard: BS 2704

IIW2 test block (V-2 test block) is the standard test block approved by the International Welding Society. V-2 (DIN54122) compared with IIW test block, V-2 test block has the advantages of light weight and easy to carry, especially suitable for field use. See Figure 1-2.

Main Points of use:

(1) The incident point and sensitivity margin of the inclined probe were measured by using an arc reflection surface with a radius of R50mm;

(2) Using the reflection surface of 5-pass hole, the refraction range of tilt probe is 45°-65° and 65°-75°, respectively.

(3) The horizontal and vertical linearity of the flaw detector can be measured by using multiple p-wave reflections of the bottom with a thickness of 12.5mm;

(4) Two arc surfaces, R25 and R50, are used to correct the time axis and zero point.

carbon steel ultrasonic calibration blocks

stainless steel ultrasonic calibration blocks

ndt calibration block for ultrasonic testing

Carbon Steel 1018 Stainless Steel 304 ISO2400-1972E, BS2704 DIN 54120 Ultrasonic Calibration Blocks IIW V-2 Images